"Высопроизводительный весовой контроллер от компании Pavone Sistemi S.r.l. USB port, output RS232 or RS422/RS485, ASCII Protocols or MODBUS RTU Upload and download function for programming with 1006 TESTER Directly connectable to PROFIBUS Fieldbus or DEVICENET with optional internal board. Now available also with PROFINET Up to 32 addressable units, connectable to a PC or PLC 10 points linearization Calibration done using certificates of transducers Configuration and calibration from the front panel or PC via the USB serial port, RS232/RS485 with the program INNOVATION™ (MS Windows) Version bipolar ± 10V Технические характеристики DAT 400: Trasducer input voltage:5 V (max 6 load cells 350 Ohm) Measuring range:-0.5 ÷ +3.5 mV/V (-3.9 ÷ +3.9 mV/V optional) Input sensitivity:0.02 microV/division Linearity:< 0.01% FS Gain, drift:< 0.001% FS/ °C Display:6 digit, red LED (7 segments), h 14 mm LED status:4 red A/D Converter:24 bit Resolution:> 16.000.000 counts Visible resolution:60.000 divisions displayable on net weight Divisions value (adjustable):x1, x2, x5 Decimal:0.0 ; 0.00 ; 0.000 Filter:0.1÷25 Hz adjustable Keyboard:4 tactile feedback buttons Tool voltage:24 Vcc ±15% - power 5 W Temperature range:-10 ÷ +50 °C Storage Temperature:-20/+70°C Logic output:2 relays (clean contact) MAX 24 Vcc/100 mA cad. Logic input:2 optoisolated 24 Vcc PNP (External voltage) Serial door:USB, RS232C o RS422/RS485 with ASCII or Modbus RTU protocols Transmission distance:15m (RS232C), 1000m (RS422 e RS485) FIELDBUS protocol: PROFIBUS Others fieldbus comunication:CANopen, Modbus-Plus and other Peak Hold function:only for dynamics measures Baud rate:2400, 9600, 19200, 38400, 115200 adjustable Analog output optional:optoisolated 16 Bit Tension: 0÷5/10 V (R min10 K Ohm), Current: 0/4÷20 mA (R max 300 Ohm) Regulatory compliance:EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for electrical security Electrical connection:Screw terminals 5 mm Dimensions and weight:106 x 90 x 58 mm (L x H x P); 250 g"